Fixing a Broken Toilet
Updating a Bathroom
Fixing an Unstable Toilet
I found your website through Yahoo while trying to find out how to stop my toilet from wobbling. It rocks front to back. I took it out to change the flooring and it is still unsteady. I have taken it apart and replaced it twice now! The top of the flange is 3/4" in. above the floor. I measured the clearance inside the bottom of the bowl and it seems that it should reach the floor but it doesn't. The front is about 1/4 in. too high (a wood shim at its thickest part goes under easily).
A high flange is unusual... usually the rim of the flange rests on the floor. There are a number of possible reasons why the flange would have moved, but my speculating wouldn't be helpful to you right now.
One suggestion would be to hire a plumber to lower the flange. This would require either opening up the floor or the ceiling below... not a cheap job! Another option for a do-it-yourselfer would be to build up the floor under the toilet.
In the case of minor wobbles, I have suggested using a mildew-proof latex bathroom caulk to basically "glue" the toilet in place. However, if the toilet is actually off the floor a little, you should probably add a custom-sized spacer under the bowl.
This is easier than it sounds. First mark the profile of the toilet on the floor. Then remove the toilet and place it on a piece of plywood of the proper thickness. In your case, 1/2" thick would probably do the job. Trace the shape of the toilet onto the plywood. Cut the plywood to match the profile.
Then, cut a hole in the center of the plywood for the flange, using the line you drew on the floor as a guide or use measurements from the bottom of the toilet. The hole doesn't have to be absolutely precise. It just has to allow the plywood to sit flat on the floor around the flange, matching the line you drew around the toilet bowl.
for tools and supplies for your home improvement project Shop at AceHardware.com
Once you have completed the cuts, place the plywood on the floor over the flange and reinstall the toilet. If you prefer (I would), waterproof the plywood with a sealer such as Thompson's Waterseal. Wait a few days before installing the sealed wood. Then after a week or so, you could put some caulk around the exposed plywood edge to further protect it from moisture when you wash the floor. Now it's your turn!
Have a small home repair question for THE NATURAL HANDYMAN? Just click here naturalhandyman.com/aitikia. For more home repair information, visit NH's growing list of original home repair articles and quality links naturalhandyman.com. If this information has been valuable to you, please consider making a small donation to support NH's free service to the home repair community! For more information, please visit our "Friends" page naturalhandyman.com/friends.
The Natural Handyman Site Directory
- Home Repair Articles naturalhandyman.com/iip
- Home Repair Links Library naturalhandyman.com/linkslibrary
- NH's Bookshop naturalhandyman.com/bookshop
- Find a handyman at naturalhandyman.com/network
- Win unique home repair gifts and prizes at naturalhandyman.com/contest. Please read the important copyright and disclaimer information is located at naturalhandyman.com/copyright
Take the Next Step
More Tips & Tools to Help You
Live Better...For Less
- 6 cheap, effective home security solutions
- 5 frugal ways to expand your living space
- Top 10 DIY mistakes made by home 'handymen'
- How to hire an affordable, reliable housesitter
- Helping your adult children with housing
- 10 ways to cut the cost of cleaning
- Installing bathroom in-floor heat
- Natural homemade laundry soap recipes
- How to reduce heating bills this winter
- Find the best mortgage rates in your area
- 3 ways to use a mortgage calculator
- Mortgage calculator: Calculate your payment and more
- Home equity calculator: HELOC vs. line of credit
- Should I borrow from my home equity?
- How much can additional payments save me on my mortgage?
- Who offers the most home insurance discounts?